INDOORCOMFORTKIT - BLANK ROOM OBSERVATION SHEET Prepared 2026-09-07. No measurements or example values are filled in. Room label (not an address): Sensor model, if known: Position in the room: Device accuracy / settling instructions (or unknown): Local time zone, if known: READING 1 Actual local date and time: Temperature and unit (C or F): Relative humidity (%): Same sensor and position? yes / no / unknown: Ordinary heating/cooling operation, window changes or nearby activity: READING 2 Actual local date and time: Temperature and unit (C or F): Relative humidity (%): Same sensor and position? yes / no / unknown: Ordinary heating/cooling operation, window changes or nearby activity: READING 3 Actual local date and time: Temperature and unit (C or F): Relative humidity (%): Same sensor and position? yes / no / unknown: Ordinary heating/cooling operation, window changes or nearby activity: READING 4 Actual local date and time: Temperature and unit (C or F): Relative humidity (%): Same sensor and position? yes / no / unknown: Ordinary heating/cooling operation, window changes or nearby activity: Keep necessary heating, cooling and ventilation in ordinary use. Follow the meter's instructions. Leave unknown times and values blank; do not fill gaps with estimates. Do not delay addressing active water. Summer: record cooling operation, not an assumed equipment fault. Winter: note where water appears. Room air does not measure the glass. Two readings are not a recovery curve or proof of cause. Derived dew point is calculated from temperature and RH, not independently measured. This text sheet is for manual notes, not the calculator's import format. To reopen a calculator comparison, use its room-record CSV download. Saved files remain on your device. Review labels, photos, reflections, addresses and photo metadata before choosing to share any observation. https://indoorcomfortkit.com/guides/where-to-place-hygrometer/ https://indoorcomfortkit.com/calculators/dew-point/ https://indoorcomfortkit.com/sources-and-methodology/